Using a high frequency wand can be an effective way to care for your skin, but it’s important to understand how to use it properly to get the best results. In this comprehensive guide, we’ll cover everything you need to know about high frequency skin care and how to use a high frequency wand.

What is a High Frequency Wand?

A high frequency wand is a handheld device that uses oscillating high frequency electrical currents to deliver therapeutic benefits for the skin. High frequency wands have been used in skin care since the early 1900s. Today’s wands are much more advanced, using modern high frequency technology that can penetrate deeper and provide more effective treatments than the early versions.

High frequency wands work by creating an electrical arc that causes the oxygen and nitrogen in the air to become ionized. When applied to the skin, these ionized molecules have beneficial properties. The high frequency currents also stimulate blood circulation, promote cell metabolism, and destroy acne-causing bacteria.

The Benefits of High Frequency Skin Treatments

Regular use of a high frequency wand can provide many benefits for the skin. Here are some of the top benefits you can achieve:

• Deep Cleansing - The oscillation helps dislodge dirt and oil lodged deep within pores for a deeper cleanse. It’s great for treating acne and preventing future breakouts.

• Stimulates Collagen - High frequency can help increase collagen production for firmer, more youthful looking skin. The stimulation of blood flow provides nutrients to nourish skin cells.

• Reduces Wrinkles - By boosting circulation and cell metabolism, high frequency can help minimize the appearance of fine lines and wrinkles. It improves skin elasticity.

• Fades Blemishes - The wand’s oscillation kills pimple-causing bacteria. With regular use, it fades acne scars, sun spots, and age spots by improving skin cell turnover.

• Smooths Skin Texture - Over time, pores will appear smaller and skin becomes more even-toned and supple with high frequency treatments.

How to Use a High Frequency Wand on Your Face

Using a high frequency wand on your face is easy and straightforward. Follow these steps for best results:

1. Cleanse and Tone - Start with freshly cleansed skin to remove dirt, oil, and makeup. Apply toner to balance pH and tighten pores.

2. Apply Conductive Gel - For the wand to glide smoothly across the skin, apply a thin layer of conductive gel evenly across your face. Don’t apply too much.

3. Turn On Device - Power on the high frequency wand and wait for it to reach full oscillation. This usually takes a few seconds.

4. Start Treatment - Hold the wand head 1-2 inches from the face. Slowly glide it across areas you wish to treat for 2-3 minutes per area. Don’t press hard.

5. Focus on Problem Areas - Spend more time on troubled spots like wrinkles, acne, and hyperpigmentation. But cover all areas of the face.

6. Avoid Eyes and Mouth - Keep the wand head moving around the eyes and mouth rather than directly on them. These areas are more delicate.

7. Moisturize After - When finished, turn off the device and rinse any residual gel. Apply a hydrating moisturizer to complete the treatment.

Treatment Time Per Area

To maximize high frequency benefits, use the wand on each area of your face for the recommended treatment times:

• Forehead: 2-3 minutes
• Cheeks: 2-3 minutes
• Nose: 1-2 minutes
• Chin: 1-2 minutes
• Neck: 2-3 minutes

Spend extra time on wrinkles, acne, or pigmented areas. Limit total facial treatment time to 10-15 minutes maximum to avoid overuse.

How Often to Use a High Frequency Wand on Face

For best results, aim to use your high frequency wand 3 to 5 times per week. Daily use may be too drying for some skin types. Make sure to alternate days with other treatments to allow proper rest and recovery for your skin.

It’s ideal to use it in the evening or before bed so your skin can reap the benefits overnight. But you can use it anytime of day. Just avoid sun exposure after for a few hours.

Be consistent for at least 4-6 weeks to notice improvements in your skin. Maintenance treatments 1-2 times per week will keep your complexion looking its best long-term.

How to Use a High Frequency Wand on the Body

In addition to the face, a high frequency wand can also be used on other areas of the body that can benefit from its circulation boosting and rejuvenating effects. Here are some tips:

Cellulite - Glide the wand head over areas of cellulite in circular motions for 5-10 minutes per area. Focus on the thighs, hips, abdomen, and buttocks. Improving blood flow can minimize the appearance of cellulite.

Wounds - Hold the wand 2-3 inches above cuts, scrapes, or wounds to speed up healing. The stimulated blood flow delivers nutrients and oxygen. Do this for 2-3 minutes a few times per day.

Acne - Roll blemishes using light pressure for 1-2 minutes each. The high frequency currents kill bacteria inside pores to clear acne fast.

Skin Tightening - Use circular motions over sagging skin on the arms, legs, stomach, or neck to stimulate collagen for gradual tightening over time.

Pain Relief - For aches and pains, hold the wand above painful joints or muscles to promote increased blood flow which can provide natural pain relief.

No matter what area you treat, always move the wand head continuously and avoid direct contact with the skin. Only use gentle pressure.

High Frequency Wand Treatment Tips and Precautions

To get the most out of your high frequency skin treatments while avoiding potential issues, keep these tips in mind:

• Only use on clean, dry skin so the wand glides smoothly. Never over wet skin.

• Adjust intensity settings from low to high as your skin adapts over time. Start off gently.

• The wand head should never touch the skin but remain 1-2 inches away at all times.

• Don’t use if you have pacemaker, cancer, or seizure disorders which can be affected by electromagnetic currents.

• Avoid treatment if you are pregnant, have heart disease, or wear metal jewelry which can heat up.

• Patients using medications applied to the skin should avoid high frequency treatment.

• Use a designated high frequency conductive gel. Do not use water or aloe vera gel.

• Stop immediately if you experience pain or discomfort during treatment.

• Allow 24-48 hours between high frequency treatments for skin to recover.

The Different Types of High Frequency Wands

There are a few different varieties of high frequency wands to choose from depending on your preferences and skincare needs:

Direct Wands - These have a single glass electrode that must stay 1-2 inches from the skin. They deliver concentrated oscillation to a small surface area for spot treating.

Indirect Wands - Indirect wands feature a metal coil electrode encased in glass. This allows the wand head to make light skin contact and cover a larger surface area.

Mushroom Wands - The round, mushroom-shaped head on these wands provide a wider coverage area for an even treatment over large areas like the cheeks.

Comb Wands - Comb wands have multiple metal pin electrodes. As you glide it along the skin, each pin delivers concentrated high frequency waves resulting in enhanced absorption.

Argon Wands - Argon gas high frequency wands utilize an inert, noble gas to create an electrical arc for deeper penetration without contact.

The Best High Frequency Wands

With the variety of high frequency wands available, it can be tricky to determine which is right for your needs. Here are top options to consider:

• ZO Skin Health Oxygenator: Features argon gas technology for non-contact treatment plus infrared light therapy to boost results. It’s clinical grade for optimal high frequency skin benefits.

• NuDerma Pro: This affordable FDA-approved wand includes direct, indirect, comb, and mushroom head attachments for versatile use on face and body. It’s lightweight and portable.

• Datura Portable: A rechargeable, lightweight wand perfect for travel. Has direct and indirect heads and adjustable intensity for all skin types.

• Dr. Dennis Gross DRx SpectraLite: Combining red and blue LED light therapy with direct high frequency currents enhances the anti-aging effects for visibly smoother, firmer skin.

• Rika Sonic: This professional grade device is used in many spas and salons. It offers strong oscillation power with argon gas electrodes for maximum penetration and skin rejuvenation.

No matter which type you choose, look for high quality materials like borosilicate glass and stainless steel electrodes as well as intensity control settings for the most comfortable and effective treatments. Investing in a well-made high frequency wand will provide the best results.

How to Get the Most From High Frequency Wand Treatments

Here are some final tips for getting the most skin enhancing benefits from your high frequency wand:

• Use good conductive gel formulated specifically for high frequency application. Quality gel allows smooth glide and proper current transmission.

• Start off slowly if new to high frequency treatments and gradually increase duration and intensity. It can take some time for skin to adjust.

• Always move the wand head continuously during treatment. Don’t keep it focused on one spot too long to avoid irritation.

• Follow with soothing, antioxidant-rich skincare products to maximize treatment effects and accelerate healing.

• Drink plenty of water after to rehydrate skin and enhance circulation for even better results.

• Use high frequency in combination with LED light therapy or microcurrent for amplified anti-aging effects. The combination therapy approach boosts results.

• Talk to your skincare provider about recommended treatment frequency, precautions, and aftercare based on your individual skin goals and type.

With proper use of a high quality high frequency wand and following suitable aftercare, you can reveal clear, youthful skin tone and texture. It’s an effective therapy for skin rejuvenation.